Buy 6 Fibres single mode indoor multi-fibre pre-terminated fibre optic cable, PVC jacket, from reliable fibre optic cable supplier - FS.COM.
| Connector Type | LC/SC/ST/FC |
| Polish Type | UPC/APC |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Fiber Count | 6 Fibers |
| Flame Rating | Riser (OFCR-Optical Fiber Conductive Riser)/LSZH/Plenum (OFNP) |
| Fiber Grade | G.657.A1 (Compatible with G.652.D) |
| Minimum Bend Radius | 30D (Dynamic/Static) |
| Insertion Loss | ≤0.3dB |
| Return Loss | UPC≥50dB, APC≥60dB |
| Attenuation at 1310nm | 0.36 dB/km |
| Attenuation at 1550nm | 0.22 dB/km |
| Trunk Outside Diametre (OD) | 4.5mm |
| Breakout Outside Diametre (OD) | 3.0mm |
| Polarity | A (Tx) to B (Rx) |
| Breakout Length | 0.3/0.5m |
| Armor Layer | Stainless Steel Tube |
| Tensile Strengths | 200/400N (Long/Short Term) |
| Operating Temperature | Plenum (OFNP): 0 to 70°C (32 to 158°F)<br>Riser (OFNR)/LSZH: -20 to 70°C (-4 to 158°F) |
| Storage Temperature | -40 to 70°C (-40 to 158°F) |
Stainless steel tube can provide good protection against optical fibre breakage and be used in a slight oil, gas and moisture environment, which ensure the operation of the network.
The fibre endface of APC is polished at an 8° angle and UPC is polished with no angle. Please note <br>that the two connectors cannot be mated or they will be unusable.
