Low Power Consumption for Energy-saving
Direct attach copper is suitable for very short links and offers a cost-effective way to establish an 800-Gigabit link within racks and across adjacent racks.
1 / 8
Optical Transceivers · OSFP-800G-4OFLAC04
4m (13ft) Juniper Networks Compatible 800G Twin-port OSFP 8 x 100G PAM4 IHS/Finned Top to 4 x 200G OSFP 2 x 100G PAM4 RHS/Flat Top Active Copper Breakout Cable
4m (13ft) Juniper Networks Compatible 800G Twin-port OSFP 8 x 100G PAM4 IHS/Finned Top to 4 x 200G OSFP 2 x 100G PAM4 RHS/Flat Top Active Copper Breakout Cable, Product Specification:Part Number - OSFP-800G-4OFLAC04, Vendor Name - FS, Form Factor - OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top), Max. Data Rate - 850Gbps (8x 106.25Gbps), Media - Copper, Cable Type - Active Breakout DAC (ACC)
Net price · DE
€1.233,00
ex. VAT
In stock
5-year warranty · Netcore-backed
Juniper Networks Compatible 800G OSFP IHS/Finned Top to 4x 200G OSFP RHS/Flat Top DAC Breakout Cable (4-metre, Active, OSFP to 4x OSFP, 26AWG)
FS OSFP-800G-4OFLAC04 is a 2x 400Gb/s twin-port OSFP (Octal Small Form-factor Pluggable) IHS/finned top to 4x 200G OSFP RHS/flat top active direct attached copper breakout cable. The ACC contains eight high-speed electrical copper pairs, each operating at data rates of up to 100Gb/s using 100G-PAM4 modulation. It complies with IEEE 802.3ck, CMIS 5.0, and OSFP MSA Rev 5.0 standards.
The OSFP end has a IHS/finned top for additional cooling, while the other OSFP ends are RHS/flat top modules that rely on the cooling fins integrated into the adapter cages. It is primarily used to link an 800Gb/s QFX5240 switch to four OSFP-based 200Gb/s NICs.
ACC cables integrate a redriver chip that extends reach up to 5 metres while ensuring latency, enhancing port bandwidth, density, and configurability. These power-efficient links are ideal for medium-distance connectivity in data centres, AI/HPC clusters, and cross-rack deployments.
Note: "Finned top" transceivers are now called "Integrated Heat Sink" (IHS) as the cooling fins are integrated into the OSFP connector metal top. Commonly used in air-cooled switches.
"Flat top" transceivers are now called "Riding Heat Sink" (RHS) as the cooling fins ride on top of the network card or system's internal cages. This is used for both air-cooled and liquid-cooled applications for DGX, ConnectX-7, and BlueField-3 DPUS.
The OSFP end has a IHS/finned top for additional cooling, while the other OSFP ends are RHS/flat top modules that rely on the cooling fins integrated into the adapter cages. It is primarily used to link an 800Gb/s QFX5240 switch to four OSFP-based 200Gb/s NICs.
ACC cables integrate a redriver chip that extends reach up to 5 metres while ensuring latency, enhancing port bandwidth, density, and configurability. These power-efficient links are ideal for medium-distance connectivity in data centres, AI/HPC clusters, and cross-rack deployments.
Note: "Finned top" transceivers are now called "Integrated Heat Sink" (IHS) as the cooling fins are integrated into the OSFP connector metal top. Commonly used in air-cooled switches.
"Flat top" transceivers are now called "Riding Heat Sink" (RHS) as the cooling fins ride on top of the network card or system's internal cages. This is used for both air-cooled and liquid-cooled applications for DGX, ConnectX-7, and BlueField-3 DPUS.
Highlights
- 01Max. Power Consumption 1.7W (800G End), 0.3W (200G Per End)
- 02Lowest-latency, Low Insertion Loss, Low Crosstalk, High-speed Interconnect
- 03Built-in Redriver Chip Compensates for Signal Loss and Crosstalk, Enhancing Signal Integrity
- 04100% Verified by the Original, Perfectly Compatible with Juniper QFX5240-64OD and NICs Devices
- 058x 100G-PAM4 to Quad 2x 100G-PAM4
- 06Minimum Bend Radius 32.5mm for Flexible Routing
- 07Simplifies Patching and Offers a Cost-effective Way for Short Links
- 08Compliant with CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev 5.0
- 09Plug-and-Play Operation, Faster Deployment and Easier Use
Specifications
16 fields| Part Number | OSFP-800G-4OFLAC04 |
| Vendor Name | FS |
| Form Factor | OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top) |
| Max. Data Rate | 850Gbps (8x 106.25Gbps) |
| Media | Copper |
| Cable Type | Active Breakout DAC (ACC) |
| Cable Length | 4m (13ft) |
| Wire AWG | 26AWG |
| Minimum Bend Radius | 32.5mm |
| Max. Power Consumption | 1.7W (800G End)<br/>0.3W (200G Per End) |
| Jacket Material | PET |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 to Quad 2x100G-PAM4 |
| Application | 800G/200G Ethernet |
| Protocols | CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev 5.0 |
| Warranty | 5 Years |